Baldor auto tools.
- Buff Motor 1/3 hp
The 1/3 3600 RPM 6" Buffing Motor is an industrial grade motor with a 3 year warranty. Chosen with the home hobbyist in mind, these Baldor Motors are made for professional shops, so they are designed for years of rugged use where dependability is a must. Built for buffing, these motors bear features not found in benchtop grinders. The shafts are especially long, making it easy to move pieces around the wheels. Housings are cast aluminum and the motor is completely sealed and permanently lubricated. One piece solid steel shaft. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY.
1/3 hp 3600 rpm motor with 1/2" diameter shaft. Length from housing to end of shaft is 3" long. Overall width at shaft ends is about 17 1/4".
The 1/3 HP 3600 RPM 6" Buffing Motor is an industrial grade motor. Recommend (13104) Aluminum and Brass Buffing kit or (13106) Stainless and Steels Buffing Kit. For additional buffing tips buy (13004) "The Art of Buffing" video. Wear a dust mask, hand, and eye protection during buffing operations.
- Buff Motor 1 1/2 hp
The 1 1/2 HP 3600 RPM motor with 7/8" shaft is single phase, 60 hz and requires 13.8 amps at 115 vac or 6.9 amps at 230 vac. Overall shaft length is about 30" The distance from housing to end of shaft is 7 1/4". * * Appropriate power chord needs to be attached.
The 1 1/2 HP 3600 RPM Motor with 7/8" shaft requires 13.8 Amps at 115 VAC or VAC or 6.9 Amps at 230 VAC. Cord and plug are not included. Can be wired for either 110 VAC or 220 VAC but is shipped prewired for 110 VAC.
The 1 1/2 HP 3600 RPM Motor with 7/8" shaft runs on single phase 60 HZ and requires 13.8 AMPS at 115 VAC or 6.9 AMPS at 230 VAC. Can be wired for either 110 or 220 VAC. Overall shaft length is about 30". Distance from housing to end of shaft is 7 1/4". See (13004) "The Art of Buffing" video for buffing tips and techniques. Wear a dust mask, hand, and eye protection during buffing operations. NOTE: Motor is wired at factory for 110 VAC but can be converted to 220 VAC.
Can be mounted on (13162) Buffing Pedestal, (13070) Cabinet or (13071) Pedestal. Motor is prewired at the factory for 110 VAC but can be converted to 220 VAC.
- Buffing Pedestal Gray
Ideal for working on large pieces, with great flexibility around the buffer. Wide base bolts to your shop floor, and the top is pre-drilled for easy motor mounting. Base measures 15 3/4" wide x 14" long. Overall height is 32 7/8". THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
Total height 32 7/8", base is 15 3/4" wide, 14" deep. When ultimate maneuverability is needed, the pedestal stand works best.
The Pedestal makes an excellent base for (28053) Shrinker/Stretcher Set, (28034) Rotary Bench Shear, and for maximum maneuverability when buffing. Pedestal must be bolted to the floor. See your local hardware store for mounting hardware.
SPECIAL SHIPPING CHARGES APPLY
We recommend Nyalic Clear Coat (13092 ZP) Qt. for corrosion protection on buffed areas.
- Buff Motor 1/3hp With Pedestal
The 1/3 hp 3600rpm motor comes with the baldor pedestal ideal for working on large pieces with greater flexibility around the buffer.
This Buffing Package includes a 1/3 hp 3600 rpm motor with Baldor Pedistal.
SPECIAL SHIPPING CHARGES APPLY NO ADDITIONAL DISCOUNTS APPLY
Baldor motors are built for buffing with especially long shafts to easily move pieces around the wheels. The housings are cast aluminum and the motors are completely sealed and permanently lubricated. This kit also includes the Baldor pedestal which measures 32 7/8" tall the base is 15 3/4" wide x 14" deep. Wear a dust mask, hand, and eye protection during buffing operations.
- Buff Motor 3/4 hp
The 3/4 HP 3600 RPM motor with 3/4" shaft is single phased, 60hz and requires 4.8 amps at 115 vac or 2.4 amps at 230 vac. Use our 10" buffing wheels with 3/4" asbor hole. Overall shaft length is about 28" distance from housing to the end of the shaft is about 6 1/2".
SPECIAL SHIPPING CHARGES APPLY NO ADDITIONAL DISCOUNTS APPLY
The 3/4 HP 3600 RPM motor with 3/4" shaft requires 4.8 AMPS at 115 VAC or 2.4 AMPS at 230 VAC. Use with our 10" Buffing Wheels with a 3/4" hole. Overall shaft length is about 28". Distance from housing to the end of the shaft is about 6 1/2". Comes wired for 110 VAC with cord and plug installed. and plug installed. Can be wired for 220 VAC.
Comes wired for 110 VAC with cord and plug installed. Can also be wired for 220 VAC. Works well for any metal buffing project. Usually used with our 10" buffing wheels with 3/4" arbor hole. Smaller wheels can also be made to fit by slotting the arbor hole north, south, east, and west. Overall width - 28 3/8", length of shaft from housing to end - 6 1/2". Wear a dust mask, hand, and eye protection during buffing operations.
See (13004) "The Art of Buffing" video for tips and techniques. Can be mounted on the Baldor Cabinet (13016) or Pedestal (13071).
- Buff Motor 3/4 hp 1800RPM
This 3/4 HP 1800 RPM motor with 3/4" shaft is single phase, 60hz and requires amps at 115 vac or 2.3 amps at 230 vac. Use with our 10" buffing wheel with 3/4" arbor hole. Overall shaft length is about 28" distance from the housing to end of shaft is about 6 1/2". Motor is protected by a 3 year warranty.
The 3/4 HP 1800 RPM Motor with 3/4" shaft requires 4.6 AMPS at 115 VAC or 2.3 AMPS at 230 VAC. Use with our 10" Buffing Wheels with 3/4" arbor hole. Overall shaft length is about 28". Distance from housing to the end of the shaft is about 6 1/2". Comes wired for 110 VAC with Cord and with Cord and Plug installed. Can be wired for 220 VAC.
Baldor motors are built for buffing with especially long shafts to easily move pieces around the wheels. The housings are cast aluminum and the motors are completely sealed and permanently lubricated. Comes wired for 110 VAC with cord and plug installed. Can be wired for 220 VAC. Wear dust mask, hand and eye protection during buffing operations.
See (13004) "The Art of Buffing" video for tips and techniques. Can be mounted on the Baldor Cabinet (13070), Pedestal (13071), or Budget Pedestal (13162).
- Buffing Cabinet w/Shelves Gray
Built of sturdy steel for years of service. Three shelves make great storage for your supplies. Pre-drilled for easy motor mounting. 12 3/8" wide x 34 1/2" high. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
SPECIAL SHIPPING CHARGES APPLY
The Baldor Buffing Cabinet measures 12 3/8" wide x 34 1/2" tall.
This sturdy Cabinet with shelves can be used with any of our Baldor Motors. All cabinets and motor stands must be bolted to the floor. Use the (13156) Anchor Kit, or get anchor bolts at your local hardware store.
- Buff Motor 3/4 hp With Pedestal 1800 Rpm
The 3/4 hp 1800 motor with 3/4" shaft works ideally on this Baldor pedestal. work on large pieces with great flexibility to work around the buffer.
SPECIAL SHIPPING CHARGES APPLY NO ADDITIONAL DISCOUNTS APPLY
This Buffing Package includes a 3/4 hp 1800 rpm buffing motor and Baldor Pedistal.
Baldor motors are built for buffing with especially long shafts to easily move pieces around the wheels. The housings are cast aluminum and the motors are completely sealed and permanently lubricated. This kit also includes the Baldor Pedestal. This Pedestal is 32 7/8" tall with a base 15 3/4" wide x 14" deep. The motor can be wired for 110 and for 220. Wear a dust mask, hand, and eye protection during buffing operations.
Buy The Eastwood Company accessories here!
|
|
|
